View FDP5645_417285.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

FDP5645/FDB5645
March 2000
FDP5645/FDB5645
60V N-Channel PowerTrench (R) MOSFET
General Description
This N-Channel MOSFET has been designed specifically to improve the overall efficiency of DC/DC converters using either synchronous or conventional switching PWM controllers. These MOSFETs feature faster switching and lower gate charge than other MOSFETs with comparable RDS(ON) specifications. The result is a MOSFET that is easy and safer to drive (even at very high frequencies), and DC/DC power supply designs with higher overall efficiency.
Features
* 80 A, 60 V. RDS(ON) = 0.0095 @ VGS = 10 V RDS(ON) = 0.011 @ VGS = 6 V.
* Critical DC electrical parameters specified at elevated temperature. * Rugged internal source-drain diode can eliminate the need for an external Zener diode transient suppressor. * High performance trench technology for extremely low RDS(ON). * 175C maximum junction temperature rating.
D
D
G
G D TO-220 S
FDP Series
G
S
TO-263AB
FDB Series
S
Absolute Maximum Ratings
Symbol
V DSS V GSS ID PD TJ , TSTG TL Drain-Source Voltage Gate-Source Voltage Maximum Drain Current
TA =25oC unless otherwise noted
Parameter
- Continuous (note 3) - Pulsed Total Power Dissipation @ TC = 25C Derate above 25C Operating and Storage Junction Temperature Range Maximum lead termperature for soldering purposes, 1/8" from case for 5 seconds
FDP5645
FDB5645
Units
V V A W W/C C C
60 20 80 300 125 0.83 -65 to +175 +275
Thermal Characteristics
RJ C RJA Thermal Resistance, Junction-to-Case Thermal Resistance, Junction-to-Ambient 1.2 62.5 C/W C/W
Package Marking and Ordering Information
Device Marking FDB5645 FDP5645 Device FDB5645 FDP5645 Reel Size 13"
note 2
Tape width 24mm
Quantity 800 units
(c) 2000 Fairchild Semiconductor Corporation
FDP5645/FDB5645 Rev B (W)
FDP5645/FDB5645
Electrical Characteristics
Symbol
WDSS IAR
TA = 25C unless otherwise noted
Parameter
(Note 1)
Test Conditions
V DD = 40 V, ID = 80 A
Min
Typ
Max Units
800 80 mJ A
Drain-Source Avalanche Ratings
Single Pulse Drain-Source Avalanche Energy
Maximum Drain-Source Avalanche Current Drain-Source Breakdown Voltage Breakdown Voltage Temperature Coefficient Zero Gate Voltage Drain Current Gate-Body Leakage, Forward Gate-Body Leakage, Reverse
(Note 1)
Off Characteristics
BV DSS BVDSS TJ IDSS IGSSF IGSSR V GS(th) VGS(th) TJ RDS(on) V GS = 0 V, ID = 250 A ID = 250 A, Referenced to 25C V DS = 48 V, V GS = 20 V, V GS = 20 V, V GS = 0 V V DS = 0 V V DS = 0 V 2 -7.8 8 13 9 60 88 9.5 18 11 60 64 1 100 -100 4 V mV/C A nA nA V mV/C m
On Characteristics
Gate Threshold Voltage Gate Threshold Voltage Temperature Coefficient Static Drain-Source On-Resistance On-State Drain Current Forward Transconductance
V DS = V GS , ID = 250 A ID = 250 A, Referenced to 25C V GS = 10 V, ID = 40 A V GS =10V, ID = 40 A, TJ =125C V GS = 6 V, ID = 38 A V GS = 10 V, V DS = 10 V V DS = 5 V, ID = 40 A
ID(on) gFS
A S
Dynamic Characteristics
Ciss Coss Crss Input Capacitance Output Capacitance Reverse Transfer Capacitance
(Note 2)
V DS = 30 V, f = 1.0 MHz
V GS = 0 V,
4468 810 198
pF pF pF
Switching Characteristics
td(on) tr td(off) tf Qg Qgs Qgd IS IS V SD
Notes:
Turn-On Delay Time Turn-On Rise Time Turn-Off Delay Time Turn-Off Fall Time Total Gate Charge Gate-Source Charge Gate-Drain Charge
V DD = 30 V, V GS = 10 V,
ID = 1 A, RGEN = 6
21 13 77 42
30 20 90 50 107
ns ns ns ns nC nC nC
V DS = 30 V, V GS = 10 V
ID = 80 A,
76 18 21
Drain-Source Diode Characteristics and Maximum Ratings
Maximum Continuous Drain-Source Diode Forward Current Maximum Pulsed Drain-Source Diode Forward Current Drain-Source Diode Forward V GS = 0 V, IS = 40 A Voltage 0.9 80 300 1.3 A A V
1. Pulse Test: Pulse Width < 300s, Duty Cycle < 2.0% 2. TO-220 package is supplied in tube / rail @ 45 pieces per rail. 3. Calculated continuous current based on maximum allowable junction temperature. Actual maximum continuous current limited by package constraints to 75A
FDP5645/FDB5645 Rev. B (W)
FDP5645/FDB5645
Typical Characteristics
100 V GS = 10V 80 7.0V 5.0V 60 4.5V 40 RDS(ON) NORMALIZED , DRAIN-SOURCE ON-RESISTANCE ID , DRAIN-SOURCE CURRENT (A) 6.0V
2
1.8 1.6
V GS = 4.5V
1.4 5.0V 1.2 6.0V 1 8.0V 0.8 7.0V 10V
20 4.0V 0 0 1 2 3 4 5 V DS , DRAIN-SOURCE VOLTAGE (V)
0
20
40
60
80
100
ID, DRAIN CURRENT (A)
Figure 1. On-Region Characteristics.
Figure 2. On-Resistance Variation with Drain Current and Gate Voltage.
0.024
2.2 RDS(ON) NORMALIZED , DRAIN-SOURCE ON-RESISTANCE RDS(ON) ON-RESISTANCE (OHM) , 2 1.8 1.6 1.4 1.2 1 0.8 0.6 0.4 -50 -25 0 25 50 75 100 125 150 175 T J, JUNCTION TEMPERATURE ( oC) ID = 42A V GS = 10V
ID = 42A 0.02 T A = 125o C
0.016
0.012
0.008
TA = 25o C
0.004
0 3 4 5 6 7 8 9 10 V GS, GATE TO SOURCE VOLTAGE (V)
Figure 3. On-Resistance Variation withTemperature.
90 IS, REVERSE DRAIN CURRENT (A) 80 ID, DRAIN CURRENT (A) 70 60 50 40 30 20 10 0 2 3 4 5 6 V GS, GATE TO SOURCE VOLTAGE (V) T A = 125o C 25oC -55 oC V DS = 5V
Figure 4. On-Resistance Variation with Gate-to-Source Voltage.
100 VGS = 0V 10 TA = 125o C 25o C -55 oC 0.1
1
0.01
0.001 0 0.2 0.4 0.6 0.8 1 1.2 1.4 V SD, BODY DIODE FORWARD VOLTAGE (V)
Figure 5. Transfer Characteristics.
Figure 6. Body Diode Forward Voltage Variation with Source Current and Temperature.
FDP5645/FDB5645 Rev. B (W)
FDP5645/FDB5645
Typical Characteristics
10 VGS, GATE-SOURCE VOLTAGE (V) ID = 85A 8 VDS = 10V 30V CAPACITANCE (pF)
6000 20V 5000 CISS 4000 f = 1MHz V GS = 0 V
6
3000 2000
4
2 1000 0 0 10 20 30 40 50 60 70 80 Qg, GATE CHARGE (nC) COSS CRSS 0 10 20 30 40 50 60
0
V DS, DRAIN TO SOURCE VOLTAGE (V)
Figure 7. Gate Charge Characteristics.
1000
Figure 8. Capacitance Characteristics.
5000 SINGLE PULSE 4000 RJC = 1.2 oC/W T C = 25o C
ID, DRAIN CURRENT (A)
100
POWER (W) 100
RDS(ON) LIMIT 10ms 100ms
100s 1ms
3000
2000
10
V GS = 10V SINGLE PULSE R JC = 1.2o C/W TC = 25oC
DC
1000
1 0.1 1 10 V DS, DRAIN-SOURCE VOLTAGE (V)
0 0.01
0.1
1
10
100
1000
SINGLE PULSE TIME (ms)
Figure 9. Maximum Safe Operating Area.
Figure 10. Single Pulse Maximum Power Dissipation.
1 TRANSIENT THERMAL RESISTANCE 0.5 0.3 0.2 0.1 0.05 0.02 0.03 0.02 Single Pulse 0.01 0.01 0.05 0.1 0.5 1 5 t1 ,TIME (ms) 10 50 0.01 0.2 0.1 P(pk) 0.05 t1
t2
D = 0.5 R J C (t) = r(t) * R J C R J C = 1.2 C/W
TJ - T = P * R J C (t) C Duty Cycle, D = t 1 / t 2 100 500 1000
,
)
t
(
r
Figure 11. Transient Thermal Response Curve.
Thermal characterization performed using the conditions described in Note 1c. Transient thermal response will change depending on the circuit board design.
FDP5645/FDB5645 Rev. B (W)
TO-220 Tape and Reel Data and Package Dimensions
TO-220 Tube Packing Configuration: Figur e 1.0
Packaging Description:
TO-220 parts are ship ped normally in tube. The tube is made of PVC plastic treated with anti -stati c agent.These tubes in standard option are placed inside a dissipative plastic bag, barcode labeled, and placed inside a box made of recyclable corrugated pa per. One box contains two ba gs maximum (see fig. 1.0). And one or several o f these boxes are placed inside a labeled shipp ing bo x whic h c omes in different sizes dependi ng on the nu mber of parts ship ped. The other option comes in bulk as described in the Packagin g Information table. The unit s in this option are placed inside a small box laid w ith antistatic bubble sheet. These smaller boxes are individually labeled and placed ins ide a larger box (see fig. 3.0). These larger or intermediate boxes then will b e placed finally inside a labeled shipping box whic h still comes in different sizes depending on the number of units shipped.
45 unit s per Tube
12 Tubes per Bag
2 bag s per Box Conduct ive Plasti c B ag
530mm x 130mm x 83mm Intermediate box
TO-220 Packaging Information: Figure 2.0
TO-220 Packaging Information Packaging Option Packaging type Qty per Tube/Box Box Dimension (mm) Max qty per Box Weight per unit (gm) Note/Comments Standard
(no f l ow code )
FSCINT Labe l samp le
FAIRCHILD SEMICONDUCTOR CORPORATION
1080 uni ts maxi mum quant it y per bo x
S62Z BULK 300
LOT:
CBVK741B019
QTY:
HTB:B 1080
NSID:
FDP7060
SPEC:
Rail/Tube 45 530x130x83 1,080 1.4378
D/C1:
D9842
SPEC REV: QA REV:
B2
114x102x51 1,500 1.4378
FSCINT Label
(FSCINT)
TO-220 bulk Packing Configuration: Figure 3.0
FSCINT Label An ti-stati c Bubbl e Sheet s 530mm x 130mm x 83mm Intermediate box
1500 uni ts maxi mum quant it y per intermediate box 300 units per EO70 box 114mm x 102mm x 51mm EO70 Immed iate Box 5 EO70 boxe s per per Interm ediate Bo x
FSCINT Label
TO-220 Tube Configuration: Figure 4.0
Note: All dim ensions are in inches
0.123 +0.001 -0.003
0.165 0.080 0.450 .030 1.300 .015 0.032 .003 0.275
F9852 NDP4060L
F9852 NDP4060L
F9852 NDP4060L
F9852 NDP4060L
F9852 NDP4060L
F9852 NDP4060L
F9852 NDP4060L
F9852 NDP4060L
F9852 NDP4060L
F9852 NDP4060L
F9852 NDP4060L
F9852 NDP4060L
0.160
20.000 +0.031 -0.065
0.800 0.275
August 1999, Rev. B
TO-220 Tape and Reel Data and Package Dimensions, continued
TO-220 (FS PKG Code 37)
1:1
Scale 1:1 on letter size paper
Dimensions shown below are in: inches [millimeters]
Part Weight per unit (gram): 1.4378
September 1998, Rev. A
TO-263AB/D2PAK Tape and Reel Data and Package Dimensions
TO-263AB/D2PAK Packaging Configuration: Figure 1.0
Packaging Description:
EL ECT ROST AT IC SEN SIT IVE DEVICES
DO NO T SHI P OR STO RE N EAR ST RO NG EL ECT ROST AT IC EL ECT RO M AGN ETI C, M AG NET IC O R R ADIO ACT IVE FI ELD S
TNR D ATE PT NUMB ER PEEL STREN GTH MIN ___ __ ____ __ ___gms MAX ___ ___ ___ ___ _ gms
Antistatic Cover Tape
ESD Label
TO-263/D2PAK parts are shipped in tape. The carrier tape is made from a dissipative (carbon filled) polycarbonate resin. The cover tape is a multilayer film (Heat Activated Adhesive in nature) primarily composed of polyester film, adhesive layer, sealant, and anti-static sprayed agent. These reeled parts in standard option are shipped with 800 units per 13" or 330cm diameter reel. The reels are dark blue in color and is made of polystyrene plastic (antistatic coated). This and some other options are further described in the Packaging Information table. These full reels are individually barcode labeled, dry packed, and placed inside a standard intermediate box (illustrated in figure 1.0) made of recyclable corrugated brown paper. One box contains one reel maximum. And these boxes are placed inside a barcode labeled shipping box which comes in different sizes depending on the number of parts shipped.
CAUTION
Static Dissipative Embossed Carrier Tape Moisture Sensitive Label F63TNR Label Customized Label
TO-263AB/D2PAK Packaging Information Packaging Option Packaging type Qty per Reel/Tube/Bag Reel Size Box Dimension (mm) Max qty per Box Weight per unit (gm) Weight per Reel Note/Comments Standard (no flow code) TNR 800 13" Dia 359x359x57 800 1.4378 1.6050 L86Z Rail/Tube 45 530x130x83 1,080 1.4378 -
TO-263AB/D2PAK Unit Orientation
359mm x 359mm x 57mm Standard Intermediate box ESD Label
F63TNR Label sample
F63TNR Label
LOT: CBVK741B019 FSID: FDB6320L QTY: 800 SPEC:
DRYPACK Bag
(F63TNR)3
D/C1: D9842 D/C2:
QTY1: QTY2:
SPEC REV: CPN: N/F: F
TO-263AB/D2PAK Tape Leader and Trailer Configuration: Figure 2.0
Carrier Tape Cover Tape
Components Trailer Tape 400mm minimum or 25 empty pockets Leader Tape 1520mm minimum or 95 empty pockets
September 1999, Rev. B
F9835 FDB603AL
F9835 FDB603AL
F9835 FDB603AL
F9835 FDB603AL
Moisture Sensitive Label
TO-263AB/D2PAK Tape and Reel Data and Package Dimensions, continued
TO-263AB/D2PAK Embossed Carrier Tape Configuration: Figure 3.0 P0
T E1
D0
F K0 Wc B0 E2 W
Tc A0 P1 D1
User Direction of Feed
Dimensions are in millimeter Pkg type TO263AB/ D2PAK (24mm)
A0
10.60 +/-0.10
B0
15.80 +/-0.10
W
24.0 +/-0.3
D0
1.55 +/-0.05
D1
1.60 +/-0.10
E1
1.75 +/-0.10
E2
22.25 min
F
11.50 +/-0.10
P1
16.0 +/-0.1
P0
4.0 +/-0.1
K0
4.90 +/-0.10
T
0.450 +/-0.150
Wc
21.0 +/-0.3
Tc
0.06 +/-0.02
Notes: A0, B0, and K0 dimensions are determined with respect to the EIA/Jedec RS-481 rotational and lateral movement requirements (see sketches A, B, and C).
10 deg maximum Typical component cavity center line
0.9mm maximum
B0 10 deg maximum component rotation
0.9mm maximum
Sketch A (Side or Front Sectional View)
Component Rotation
A0 Sketch B (Top View)
Typical component center line
Sketch C (Top View)
Component lateral movement
TO-263AB/D Figure 4.0
2PAK
Reel Configuration:
Component Rotation
W1 Measured at Hub
Dim A Max
B Min Dim C
Dim A max
Dim N
Dim D min
DETAIL AA See detail AA W3
13" Diameter Option
W2 max Measured at Hub
Dimensions are in inches and millimeters
Tape Size
24mm
Reel Option
13" Dia
Dim A
13.00 330
Dim B
0.059 1.5
Dim C
512 +0.020/-0.008 13 +0.5/-0.2
Dim D
0.795 20.2
Dim N
4.00 100
Dim W1
0.961 +0.078/-0.000 24.4 +2/0
Dim W2
1.197 30.4
Dim W3 (LSL-USL)
0.941 - 0.1.079 23.9 - 27.4
August 1999, Rev. B
TO-263AB/D2PAK Tape and Reel Data and Package Dimensions, continued
TO-263AB/D2PAK (FS PKG Code 45)
1:1
Scale 1:1 on letter size paper
Dimensions shown below are in: inches [millimeters]
Part Weight per unit (gram): 1.4378
August 1998, Rev. A
TRADEMARKS
The following are registered and unregistered trademarks Fairchild Semiconductor owns or is authorized to use and is not intended to be an exhaustive list of all such trademarks.
ACExTM CoolFETTM CROSSVOLTTM E2CMOSTM FACTTM FACT Quiet SeriesTM FAST(R) FASTrTM GTOTM HiSeCTM
DISCLAIMER
ISOPLANARTM MICROWIRETM POPTM PowerTrench QFETTM QSTM Quiet SeriesTM SuperSOTTM-3 SuperSOTTM-6 SuperSOTTM-8
SyncFETTM TinyLogicTM UHCTM VCXTM
FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS.
LIFE SUPPORT POLICY FAIRCHILD'S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 1. Life support devices or systems are devices or 2. A critical component is any component of a life support device or system whose failure to perform can systems which, (a) are intended for surgical implant into be reasonably expected to cause the failure of the life the body, or (b) support or sustain life, or (c) whose support device or system, or to affect its safety or failure to perform when properly used in accordance with instructions for use provided in the labeling, can be effectiveness. reasonably expected to result in significant injury to the user. PRODUCT STATUS DEFINITIONS Definition of Terms Datasheet Identification Advance Information Product Status Formative or In Design Definition This datasheet contains the design specifications for product development. Specifications may change in any manner without notice. This datasheet contains preliminary data, and supplementary data will be published at a later date. Fairchild Semiconductor reserves the right to make changes at any time without notice in order to improve design. This datasheet contains final specifications. Fairchild Semiconductor reserves the right to make changes at any time without notice in order to improve design.
Preliminary
First Production
No Identification Needed
Full Production
Obsolete
Not In Production
This datasheet contains specifications on a product that has been discontinued by Fairchild semiconductor. The datasheet is printed for reference information only.
Rev. D

▲Up To Search▲

Price & Availability of FDP5645

	To Download FDP5645 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .